Printing tips
Every sheet on Coloring Orchard has two PDFs. They are vector files, which means the outlines are stored as shapes, not pixels, and print sharp at any size.
Letter or A4
Use the Letter PDF for US Letter paper (8.5 by 11 inches), the usual size in the United States and Canada. Use the A4 PDF for A4 paper (210 by 297 millimetres), the usual size almost everywhere else. In both, the drawing sits at least half an inch from every edge, clear of the strip that most home printers cannot print on.
Printer settings
- Scale: choose "Actual size" or 100%. "Fit to page" also works, because the margins are already built in.
- Color: choose black and white or greyscale. The drawings contain no color, so this only saves colored ink.
- Quality: normal is usually enough. Draft mode can leave thin lines looking broken on the detailed sheets.
- Two-sided: turn it off, especially for markers, which bleed through.
Which paper
- Crayons and colored pencils: ordinary copy paper is fine.
- Markers: a heavier paper (around 28 lb or 105 gsm and up) bleeds less. Put a spare sheet underneath.
- Watercolor or poster paint: use card stock or mixed-media paper that your printer accepts, and let the ink dry for a few minutes first. Inkjet ink can run when wet; laser prints do not.
Printing smaller or larger
To make cards or a mini coloring book, print two pages per sheet from your print dialog. To make a poster, use the poster or tile option if your printer software has one. Because the files are vector, enlarging does not blur the lines.
From a phone or tablet
Open the PDF, then use Share and Print. If the page looks cropped, check that the paper size in the print options matches the PDF you opened.